The qualified quicklime is crushed to about 40mm by the jaw crusher, and sent to the crushed calcium oxide storage tank through the bucket elevator. The lime in the calcium hydroxide manufacturer's silo enters the pre-slaked lime through the steady flow screw conveyor or the quantitative weighing system. The mixer starts to digest under the intense stirring of the mixing rod (it can be divided into single, double and triple shafts according to different output values), and then enters the slaked lime mixer to complete the digestion process.
The digested lime is fed into the slaked lime silo by the slaked lime elevator and the silo screw conveyor, and the calcium hydroxide manufacturer then obtains qualified refined slaked lime from the ash-adding spiral air separator.
The refined slaked lime is unloaded into the finished slaked lime silo, and then sub-packaged according to user needs.
Calcium hydroxide dry production can complete automatic production, the production process is environmentally friendly, the output is large, the quality of calcium hydroxide manufacturers is stable, the calcium hydroxide products produced are free of impurities, and have good activity, etc., and gradually become a mainstream processing technology. The calcium hydroxide products produced by the dry process are more widely used than milk calcium hydroxide, and are mainly used in many fields such as chemical industry, environmental protection, construction, food, medical treatment, etc. In addition, storage and transportation are more convenient.
